Acroprint ES900 - ES900 Time Table Program Features; I-Mark

40
Set 1st Character Code
1. In this example, the 1st character is "B". Press CHANGE until the Character Code is
"03" (B). Refer to “Character Code for Alphanumeric” on pages 64-68.
2. Press SET.
3. The "Character Code" changes to "Character Position".
4. Press SET.
5. The "Character Position" changes to the "Character Code".
Set 2nd Character Code
1. In this example, the 2nd character is "O". Press CHANGE until the Character Code "10" (O).
Refer to “Character Code for Alphanumeric” on pages 64-68.
2. Press SET.
3. The "Character Code" changes to "Character Position".
4. Press SET.
5. The "Character Position" changes to the "Character Code".