•“Find and Fix” Mode helps the
technician locate leakage sources
within 20 feet from source.
•“Find and Fix” Mode quickly guides
the field technician to the leakage
source by updating the leakage
value 10 times per second.
• Both meters are significantly
more sensitive, accurate and
directional when used in conjunc-
tion with the HD-1 dipole anten-
na and the LT1000 tagger.
• Each meter screen has a high res-
olution, graphic LCD that allows
for simple user interface.
• The leakage configuration set-up
can be programmed into a CLI
and then cloned or downloaded
into other CLI meters or
StealthWare.
• Both meters can remain in the CLI
carrying case while mounted in the
docking station. This carrying case
feature allows the field technician
the convenience of a quick mount
in the docking station and pro-
vides the portability needed for
outside use.
The CLI-1450 and CLI-1750 are almost
identical in their appearance and
functionality. The primary difference is
that the CLI-1750 can interface with
the LST-1700 (signal transmitter), and
the combined meters form the Home
Wiring Test Kit (HWTK). The HWTK
offers features that extend beyond
leakage and ingress measurements,
including frequency domain reflec-
tometry (FDR) for cable fault detec-
tion and a unique mini-sweep for test-
ing frequency response.
With the HWTK’s comprehensive test
capabilities, the installer technician
can confirm whether or not the current
home wiring is acceptable for trans-
porting advanced cable services. The
presence of unterminated devices,
non-conforming components and
cable/component faults can be detect-
ed by using the innovative FDR and
min-sweep functions. In addition, the
LST-1700 can be used at the subscriber
premises to transmit a dedicated leak-
age signal. This leakage signal can be
detected by the CLI-1750 for monitor-
ing in-home leakage. The LST-1700
can even frequency "tag" it’s own CW
signal to prevent false leakage alarms
caused by unwanted outside signals!
3-3
Home Wiring Test Kit: CLI-1750 and LST-1700