ACTi Z83 - Mounting Options

www.acti.com
Hardware Manual
11
Mounting Options
Select the most suitable solution for your installation environment. The camera can be mounted
by either of the following methods:
Mount Types
Accessories
Surface Mount
Suitable when mounting the camera directly on walls or ceilings without
additional mounting accessories. See Installation Procedures on page
12 for more information.
Wall Mount
Suitable when mounting the camera on the wall with the camera facing
down as if installed on the ceiling. The Wall Mount (optional mounting
accessory) is required for this type of installation.
Pendant Mount
Suitable when installing the camera on high ceilings where a straight
tube is used to lower the camera. The Pendant Mount with Mount Kit
(optional accessory set) is required for this type of installation.
Pole mount
Suitable when installing the camera on a vertical pole. The Pole mount
(optional accessory set) is required for this type of installation.
NOTE:
 For more information about the mounting solutions and accessories, please check the
Mounting Accessory Selector in our website (http://www.acti.com/mountingselector).
 The above mounting accessories are not included in the package. Contact your sales
agents to purchase.