115
Static IP Address
on the Computer
To communicate with the Gateway from a computer on the network (to use the
Web Configuration Utility, for example), the user may have to switch the IP address
settings from DHCP-enabled to static IP, so that the computer and the Gateway are
on the same subnet.
To set up static IP on a computer, select the operating system and follow the
instructions.
☞
Note: The following procedures are based on the Gateway’s
factory default IP address. If the Gateway’s IP address has been
changed, enter the new IP address when instructed to enter an
IP address.
Windows 98 SE
1. From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.
B
To Next Page
Loading...
