Status
After configuring the Gateway, settings can be viewed by selecting Status in
the Main Menu. The “Current Status” screen appears, displaying many of the
Gateway’s settings. No settings (other than connecting or disconnecting from the
Internet) can be changed from the Current Status screen.
Firmware Version
Displays the firmware version the Gateway is currently running.
MAC Address
Displays the MAC (Media Access Control) address of the Gateway.
WAN - Connection
Displays the state of the connection to the ISP service (Connected or
Disconnected).
WAN - Mode
Displays the type of connection used to communicate with the ISP.
To Next Page
Loading...
