ActionTec GT701-WG - Connecting a Computer to the Modem

10
Actiontec DSL Modem with Wireless Gateway User Manual
11
Chapter 2 Setting Up the Modem
Connecting a Computer to the Modem
Connecting a computer to the Modem for setup involves three basic steps: initial
setup, plugging in the Modem’s power cord, and connecting the Modem to the
computer.
☞
Note: The following procedures are for U.S. installations only.
Connecting Via Ethernet
1. Insert the Installation CD in the CD-ROM drive of the computer. The
Installation Guide will start automatically. Wait until the following screen
appears, read the on-screen instructions, select English, then click Next.
2. Read the instructions concerning firewall and anti-virus software, then
click Next.