8. In the “DHCP Server Configuration” screen, select “Static” from the
“DNS” options near the center of the screen, then enter the DNS Server IP
addresses assigned by the ISP in the appropriate text boxes.
☞
Note: If the ISP did not provide static DNS addresses, leave the
DNS option at “Dynamic.” Also, if the DHCP server option
is turned off, this screen will not appear. The Gateway will
obtain dynamically assigned DNS addresses if supported by
the ISP with static IP addresses.
9. Click “Save and Restart” from the menu on the left side.
10. The “Save and Restart” page appears. Click “Save and Restart” to save the set-
tings.
11. Once the Gateway restarts, return to the Setup/Configuration screen and
select Change Admin Password from the menu on the left side.
To Next Page
Loading...
