ActronAir CP05 - Storage & Operating Conditions; Waste Electrical & Electronic Equipment Disposal Guidelines

4
Operation Manual - (CP05 / CP10) Commercial Control Interface
Doc. No. 0525-031 Ver. 3 190308
• Do not use corrosive chemicals, solvents or other aggressive detergents to clean the unit
and the control interface.
• Do not use the unit for applications other than those specied in the technical manual.
Contact ActronAir for technical data.
• Do not install the unit in environment with highly ammable, combustible and/or explosive
articles and materials.
• The product, particularly the controlling devices, must be stored and installed in a location
that complies with the temperature and humidity limits specied in this manual.
ActronAir is constantly seeking ways to improve the design of its products, therefore
specications are subject to change without prior notice. Please check with your ActronAir
Technical Support Department on toll free number: 1800 119 229.
Storage & Operating Conditions
• Storage conditions: -20 to 70
o
C, 90% RH non-condensing
• Operating conditions: -10 to 60
o
C, 90% RH non-condensing
Waste Electrical & Electronic Equipment Disposal Guidelines
1. Do not dispose off the waste electrical & electronic equipment with local council
waste. These must be disposed off through the council designated hazardous
waste collection centre.
2. The terminal contains a battery that must be removed and separated from the rest
of the product before disposing off the terminal.
3. The equipment may contain hazardous substances, improper or incorrect disposal
may have a negative effect on human health and on the environment.