Need help?Do you have a question about the ActronAir LC7-2W and is the answer not in the manual?
General| Brand | ActronAir |
|---|---|
| Model | LC7-2W |
| Category | Control Unit |
| Language | English |
Warnings about removing panels and not inserting objects into openings to prevent injury.
Appliance not for unsupervised use by children or infirm people.
Importance of using the return air filter for system efficiency and preventing failure.
Precautions for power interruptions to the outdoor compressor unit.
System restarts in the same mode after power restoration if option selected.
Allows up to three wall controls on one system for larger buildings.
Button press to display room or outside temperature for 10 seconds.
Automatic defrost activation when frost builds on outdoor heat exchanger.
Indoor fan delay on heating start to warm up heat exchanger.
Indicator lights up when it's time to check or clean the filter.
System detects faults and displays relevant fault codes on the wall control.
Displays operating conditions, settings, and indicators.
Button for setting the after-hours timer.
Button for setting clock and entering 7-Day time clock menu.
Button to change fan speed and operation mode.
Button to increase the room temperature setting.
Button to decrease the room temperature setting.
Button for quick exit from programming menus.
Buttons to control individual zones.
Repeats previous settings and adjusts backlight level.
Buttons for setting clock and displaying room temperature.
Tag for NFC communication.
Button to set operating mode (auto, heat, cool, fan).
Button to activate timer function.
Displays indoor temperature, day, and set temperature.
Button to turn the unit on or off.
Explains various indicators displayed on the LCD screen.
Instructions on how to turn the air conditioner on and off.
How to set the unit to fan-only mode.
How to set the unit to cooling mode and adjust settings.
How to set the unit to heating mode and adjust settings.
How to set the unit to auto mode and adjust settings.
How to set a timer to turn the unit off after a specified period.
How to adjust the brightness of the LCD screen.
How to keep the LCD backlight permanently on.
Information about the ON/OFF button backlight.
Allows setting daily ON/OFF times for the air conditioning system.
Details on how the 7-day time clock operates.
Steps to enable the 7-day time clock feature.
How to set the ON and OFF times for programmable events.
Feature to copy programmed events to subsequent days.
Steps to cancel a programmed event for a specific day.
Steps to re-activate a previously cancelled event.
Procedure to disable the 7-day time clock feature.
Instructions for setting the current time and day.
Feature to maintain building temperature at a pre-determined level.
How to enable the temperature set back feature.
How to configure the set back temperatures for cooling and heating.
Explains the different display screens during set back operation.
Steps to disable the temperature set back feature.
Feature to prevent users from changing the operating mode.
How to prevent users from changing the operating mode.
Feature to prevent users from changing the setpoint temperature.
How to prevent users from changing the setpoint temperature.
Feature to prevent users from changing the fan speed.
How to prevent users from changing the fan speed.
Feature to lock all buttons except specific function buttons.
How to lock all buttons except specific function buttons.
Procedure to reset the filter timer after cleaning.
How to enable and set the duration for the after hours function.
Instructions for using NFC on iOS devices to access the manual.
Instructions for using NFC on Android devices to access the manual.
To Next Page
