9
Operation Manual
LC7-2 Wall Control
Operation Manual - LC7-2 Wall Control
Document: 0525-080 Ver. 1 190923
08. Turn Air Conditioner On/Off
NOTE
The air conditioning system will re-start on your last settings and operating mode e.g. 22
o
C set temperature, AUTO mode,
HIGH fan speed.
The display will show the Set Temperature, Fan Speed, Fan Mode and Mode of Operation.
08.01. Turn On the Air Conditioner
1. Press the
button once to turn On and Press the
button once again to turn Off.
09. Adjusting Set Temperature
Press either the or buttons to either increase or decrease the temperature correspondingly.
NOTE
• For a WARMER room temperature, press the button.
• For a COOLER room temperature, press the button.
• The Set Temp is adjustable between 16°C and 30°C in 0.5°C increments.
• The Set Temp is adjustable in control even when the system is Off.
• No Set Temp displayed during Fan-Only Mode.
10. Changing Operating Mode
NOTE
For all modes of operation, LOW, MED, HIGH, LOW CONT, MED CONT and HIGH CONT Fan Speeds can only be selected if
the 3-Speed Fan setting option is selected. Otherwise MED and MED CONT are available for 1-Speed Fan.
NOTE
When in Fan-Only Mode LOW CONT, MED CONT and HIGH CONT will not be available
NOTE
When the system is ON, the Indoor Fan can run continuously and is indicated by the CONT indicator on the LCD. This is
generally preferred during the Cooling Mode to ensure maximum air circulation. When set to LOW, MED or HIGH the fan will
cycle with the compressor operation according to set point and room temperatures.
To Next Page
Loading...
Need help?
General
