22
Operation Manual
LC7-2 Wall Control
Operation Manual - LC7-2 Wall Control
Document: 0525-080 Ver. 1 190923
4. Press the PROG button to accept the selection and de-activate time clock, then press the EXIT button
once. TIME CLOCK indicators will disappear from main screen, indicating that the Time clock has been
de-activated.
13.02. Setting the Clock
The system’s status must be On before performing these procedures.
1. Press the PROG button to enter program Menu.
2. Press the or buttons to navigate to Program Menu 02.
3. Press the PROG button to enter Program Menu 02. Display will show clock display. Hour field and TIME is
blinking.
4. Press the or buttons to adjust the Hour. AM / PM will adjust after the 12th hour.
To Next Page
Loading...
Need help?
General
