33
Operation Manual
LC7-2 Wall Control
Operation Manual - LC7-2 Wall Control
Document: 0525-080 Ver. 1 190923
5. Press the or buttons to turn the fan lock ON.
6. Press the PROG button to accept the selection.
7. Press the EXIT button once to go back to the main Screen
8. When the FAN button is pressed, the symbol will appear for 3 seconds and user won’t be able to
change fan speed.
NOTE
To disable Fan Speed Lock, follow same steps above. However, in step 5 select OFF.
1 3.0 7. Keypad Lock
NOTE
• Keypad Lock will prevent user from changing the setpoint on wall controller.
• Keypad Lock may be set independently on each wall controller connected.
13.07.01. Activating Keypad Lock
1. Press the PROG button to enter program Menu
To Next Page
Loading...
Need help?
General
