28
Operation Manual
LC7-2 Wall Control
Operation Manual - LC7-2 Wall Control
Document: 0525-080 Ver. 1 190923
2. Press the or buttons to navigate to Program Menu 03.
3. Press the PROG button to enter Program Menu 03.
NOTE
Display will show set back display. ON field is blinking.
4. Press the or buttons to toggle from ON to OFF.
5. Press the PROG button to confirm the selection.
6. Press the EXIT button once to go back to Main Screen.
13.04. Mode Lock
13.04.01. Activating Mode Lock
NOTE
• Mode Lock will prevent user from changing the mode of operation based on previous mode being used.
• Mode Lock may be set independently on each wall controller connected.
1. Ensure that the control is set to the mode you wished to lock to.
To Next Page
Loading...
Need help?
General
