ActronAir LM7-D User Manual

22
ZONE CONTROLLER FUNCTIONS
Room Temperature Display
3
Press SELECT Up or Down Arrow Button and the
room temperature will be displayed for 3 seconds.
By default, the minimum of one zone must be left ON. This is controlled •
automatically by the wall control and will not allow you to turn off the last zone
operating. However, it is possible to turn OFF all zones in some models. Contact
your installer for more details.
Switching the last zone off will cause the controller to divert to Zone 1 •
automatically.
Notice
Turning Zones ON & OFF
1
Press the Zone Button to turn zones on & off.
2
Lights are illuminated when zone is turned on.
The room temperature displayed can be the temperature at the wall controls or •
remote wall sensors or a combination of both, depending on which zones are
turned on.
Notice
FAN
AUTO
HEAT / COOL
AUTO
HEAT / COOL
INSIDE
HIGH
CONT
COOL
o
C
o
C
ON
OFF
PROGRAM
EXIT
SELECT
SET TEMP
SET TEMP
TIMER
REPEAT /
REPEAT /
3
1

ActronAir LM7-D Specifications

General

Brand	ActronAir
Model	LM7-D
Category	Controller
Language	English