4
1. Integrated Hanger
For easy wall mounting.
2. A-B-C Switch
ID code that must match sensor’s A-B-C
switch to ensure units synchronize.
3. Display Stand
4. Battery Compartment
5. RESET Button
Press and release to clear historical record.
Press and hold for 10 seconds for full reset to
factory defaults.
6. Alarm Button
To enter alarm setup mode.
Back of Display
7. Button
For setup preferences.
8. Button
For setup preferences.
9. SET Button
For setup preferences.
10. Battery Compartment Cover
9 1 2
3
4
5
10
6
7
8
A-B-C
To Next Page
Loading...
