Ad Notam INSERT - Using Your Slimline Remote Control

31
USING YOUR SLIMLINE IR REMOTE CONTROL
Switching on / off – in ready operation
Select signal input
Digits 0 – 9 Select TV program directly
In the menu: enter numbers
TXT Open / close teletext
EPG Electronic
program guide (only
DTV channels)
MENU Open / close OSD menu
EXIT EXIT
TV/R Switch between TV and radio
FAV Open / close favorites list
GOTO GOTO
BACK Previous channel
In the menu: cursor left, decrease value
In the menu: cursor up
OK – confirm selection
In the menu: cursor down
In the menu: cursor right, increase
value In the menu: color buttons
V + Increace volume
V – Decreace volume
INFO Channel
information /
Operation guide
Mute, sound on / off
CH + Switch between TV channels up
CH – Switch between TV channels down
Media Player functions
SETUP OSD menu of the DFU monitor system
SLEEP Sleeptimer
ASPECT Aspect ratio
AUDIO Select audio mode and audio track
Dimmer on / off
PRESET Scene 1 on the Dimmer RCU
functions used for ad notam Set Top Box solutions functions used for ad notam lighting solutions
BATTERIES
Please replace the batteries if your remote signal is weak. Make sure that battery is inserted with the right +/– polarity
marking. The battery cover needs to be completely closed in order to preserve the remote\s waterproof capabilities.
Observe that the contact clip
(+) is connected correctly to
the plus pole of the battery.
If the contact clip is
positioned under the battery,
the remote control will not work.
Risk of swallowing batteries! The
WATERPROOF IR remote control
contains a coin-type battery, which can
be swallowed. Keep the battery out of
reach of children at all times! Dispose of batteries
according to environmental directives.