Adafruit Feather HUZZAH ESP8266 - Page 43

On the top right of the webpage, click the Connect button. You will get a pop-up with
a list of USB devices. Select the USB port belonging to your ESP8266.
You may want to remove all other USB devices soonly the ESP8266 board is
attached, that way there's no confusion over multiple ports!
The Javascript code will now try to connect to the ROM bootloader. It may timeout for
a bit until it succeeds. On success, you will see that it isConnectedand will print out a
uniqueMAC addressidentifying the board.
Once you have successfully connected to the ESP8266, a form will appear with a spot
to enter your credentials.
To obtain your Adafruit IO credentials, navigate tothe Adafruit IO WipperSnapper
page(https://adafru.it/TAu)andclick "My Key". A modal will pop up with your Adafruit
IO username and the active key.
•
©Adafruit Industries Page 43 of 53