Appendix C: Using the Adaptec RAID Configuration Utility ● 102
Viewing the Event Log
The BIOS-based event log records all firmware events, such as configuration changes, array
creation, and boot activity.
Some events are not stored indefinitely—the event log is cleared of any non-persistent events
each time you restart your computer; additionally, once the log is full, new events overwrite
old events.
To view the event log:
1 Start the ARC utility (see page 92).
2 Select the controller you want, then press Enter.
3 When the ARC utility menu appears, then press Ctrl+P.
4 Select Controller Log Information, then press Enter.
The current event log opens.
To Next Page
Loading...
