Adaptec RAID Controller - Installing on Red Hat, Cent OS, Suse, or Fedora Linux; Installing on Debian or Ubuntu Linux; Installing on Solaris

Installing on Red Hat, Cent OS, SuSE, or Fedora Linux
To install ARCCONF on Red Hat, Cent OS, SuSE, or Fedora Linux:
1. Insert the Adaptec Installation DVD.
The Installation DVD mounts automatically. If it doesn't, mount it manually.
2. Change to the Linux manager directory:
cd /media/cdrom/maxview/linux/manager
3. Install the .bin le:
DescriptionOptions
./StorMan-9.00.i386.bin32-bit
./StorMan-9.00.x86_64.bin64-bit
4. Enter the following conguration details:
Enter your username [default: root].
Enter your operating system password.
Enter the CIM Server HTTP Port: [default:5988].
When the installation completes a conrmation message is displayed.
5. Unmount the Adaptec Installation DVD.
Installing on Debian or Ubuntu Linux
To install ARCCONF on Debian or Ubuntu Linux:
1. Insert the Adaptec Installation DVD.
2. Mount the Adaptec Installation DVD:
mount /dev/cdrom /mnt/cdrom
3. Change to the Debian manager directory:
DescriptionOptions
cd /mnt/cdrom/maxview/debian_x86/manager32-bit
cd /mnt/cdrom/maxview/debian_x86_64/manager64-bit
4. Install the .deb package (xxxxx=build number):
DescriptionOptions
dpkg -i StorMan_9.00_XXXXX_i386.deb32-bit
dpkg -i StorMan_9.00_XXXXX_x86_64.deb64-bit
5. Enter the following conguration details:
Enter your username [default: root].
Enter your operating system password.
Enter the CIM Server HTTP Port: [default:5988].
When the installation completes a conrmation message is displayed.
6. Unmount the Adaptec Installation DVD:
umount /mnt/cdrom
Installing on Solaris
To install ARCCONF on Solaris:
1. Insert the Adaptec Installation DVD.
The DVD mounts automatically. If it doesn't, mount the DVD manually, using a command similar to
this:
13Proprietary and Condential to PMC-Sierra, Inc.
Document No.: CDP-00284-01-A Rev. A, Issue:
Adaptec RAID Controller Command Line Utility User's Guide