Adaptec RAID Controller - Arcconf Setcache

Parameters
Controller#
The controller number
On
Enables the alarm
Off
Disables the alarm
Silence
Quiets the currently sounding alarm
Test
Triggers the alarm
Examples
ARCCONF SETALARM 1 TEST
ARCCONF SETALARM 1 SILENCE
arcconf setcache
Description
Changes a logical drive’s cache mode.
Syntax
ARCCONF SETCACHE <Controller#> LOGICALDRIVE <LogicalDrive#> <logical mode>
[noprompt] [nologs]
ARCCONF SETCACHE <Controller#> DEVICE <Channel> <ID> <physical mode> [nologs]
Parameters
Controller#
The controller number
LogicalDrive#
The number of the logical drive whose cache will be altered
Logical mode
Logical drive cache mode:
• RON - read cache on
• ROFF - read cache off
• WT - write through disabled
• WB - write back enabled
• WBB - write back enabled (when protected by battery or ash backup module)
Channel/ID
Lists the space-delimited channel number and device number pairs for each device to add to the logical
drive.
Physical device cache modes
• WT - write through disabled
• WB - write back enabled
35Proprietary and Condential to PMC-Sierra, Inc.
Document No.: CDP-00284-01-A Rev. A, Issue:
Adaptec RAID Controller Command Line Utility User's Guide