Adaptec RAID Controller - Arcconf Atapassword; Arcconf Consistencycheck

arcconf atapassword
Description
Sets or clears the Secure Erase password for SATA drives. See arcconf task for more information about
Secure Erase.
Syntax
ARCCONF ATAPASSWORD <Controller#> SET <new password> <Channel# ID#> ...
ARCCONF ATAPASSWORD <Controller#> CLEAR <current password> <Channel# ID#> ...
Parameters
new password | current password
Channel/ID lists the space-delimited channel number and device number (ID) pairs for each drive on
which to set or clear the password.
Channel/ID
Lists the space-delimited channel number and device number (ID) pairs for each drive on which to set
or clear the password.
Examples
ARCCONF ATAPASSWORD 1 SET uR8ryx 0 1
ARCCONF ATAPASSWORD 1 CLEAR uR8ryx 0 1
arcconf consistencycheck
Description
Toggles the background consistency check modes of the controller.
Syntax
ARCCONF CONSISTENCYCHECK <Controller#> <on|off|period <DAYS>> [noprompt]
Parameters
Controller#
Controller number.
On
Turns background consistency check on.
Period <DAYS>
Sets the number of days to complete the background consistency check. The minimum value is 10 days
(quick), the maximum is 365 days (slow). Setting the period automatically turns background consistency
check on.
Noprompt
Optional parameter that suppresses the conrmation prompt.
18Proprietary and Condential to PMC-Sierra, Inc.
Document No.: CDP-00284-01-A Rev. A, Issue:
Adaptec RAID Controller Command Line Utility User's Guide