Adaptec RAID Controller - Arcconf Rescan; Arcconf Resetstatisticscounters; Arcconf Romupdate

Examples
ARCCONF PLAYCONFIG server1_config.xml playconfig.log FORCE ALL
arcconf rescan
Description
Enables the controller to check for the removal of any disk drives in the ready state and to check for
the connection of any new disk drives to the controller. Controller rescan runs in the background,
asynchronously. When rescan is started, a message is displayed stating that the process is running in
the background and may take 10 minutes to complete. Another message is displayed if a rescan is started
while one is already in progress. Rescan status can be obtained with ARCCONF getstatus; see arcconf
getstatus on page 26 for more information.
Syntax
ARCCONF RESCAN <Controller#>
Parameters
Controller#
The controller number
Examples
ARCCONF RESCAN 1
arcconf resetstatisticscounters
Description
Resets statistics counters for a controller. Use this command to clear the counters and create fresh
statistics.
Syntax
ARCCONF RESETSTATISTICSCOUNTERS <Controller#>
Parameters
Controller#
The controller number
Examples
ARCCONF RESETSTATISTICSCOUNTERS 1
arcconf romupdate
Description
Allows new rmware and BIOS to be ashed to the controller. A reboot is required for the new rmware
to take effect.
32Proprietary and Condential to PMC-Sierra, Inc.
Document No.: CDP-00284-01-A Rev. A, Issue:
Adaptec RAID Controller Command Line Utility User's Guide