Adaptec RAID Controller - Arcconf Delete; Arcconf Driverupdate

LD#
Logical drive numbers for two or more logical drives to be concatenated into the RAID volume.
Noprompt
No prompt for conrmation
Examples
ARCCONF CREATE 1 LOGICALDRIVE STRIPESIZE 64 MAX 0 1 0 2 0 3 2 NOPROMPT
ARCCONF CREATE 1 JBOD 0 1 NOPROMPT
arcconf delete
Description
Deletes a logical drive, JBOD, or maxCache logical device. All data stored on the logical drive or JBOD
will be lost. Spanned drives cannot be deleted with this function.
Syntax
ARCCONF DELETE <Controller#> LOGICALDRIVE <LogicalDrive#> <LD#> <LD#> [noprompt]
ARCCONF DELETE <Controller#> JBOD <CHANNEL# DRIVE#> [CHANNEL# DRIVE#] ...
[noprompt]
ARCCONF DELETE <Controller#> LOGICALDRIVE|JBOD ALL [noprompt]
ARCCONF DELETE <Controller#> MAXCACHE
Parameters
Controller#
Controller# is the controller number
LogicalDrive#
LogicalDrive# is the number of the logical drive to be deleted.
LogicalDrive|JBOD ALL
Deletes all logical drives or JBODs.
MAXCACHE
Deletes the maxCache Container.
Noprompt
Optional parameter that suppresses alert messages.
Examples
ARCCONF DELETE 1 LOGICALDRIVE 1 2 3
ARCCONF DELETE 1 JBOD ALL
arcconf driverupdate
Description
Updates Windows device drivers. When given a directory name, it will attempt to update a driver to
the version found in the given directory.
Note: This command is available only on Windows systems.
21Proprietary and Condential to PMC-Sierra, Inc.
Document No.: CDP-00284-01-A Rev. A, Issue:
Adaptec RAID Controller Command Line Utility User's Guide