Adaptec RAID Controller - Arcconf Getperform; Arcconf Getsmartstats

Examples
ARCCONF GETLOGS 1 DEVICE
ARCCONF GETLOGS 1 STATS Tabular
arcconf getperform
Description
Fetches the parameters that dene a logical drive performance mode. Default is the current mode.
Syntax
ARCCONF GETPERFORM <Controller#> [Performance Mode] [Save [Filename]] [Nologs]
Parameters
Controller#
Controller number.
Performance Mode
One of the following:
• 1 - Default/Dynamic mode
• 2 - OLTP/Database
• 3 - Big Block Bypass mode
• 4 - User dened mode
Save
Saves the performance mode parameters in a le.
Filename
Name of the le in which to save the parameters. If not specied, the default lename is
PerformanceMode.cfg.
Nologs
Suppresses creation of logs for this command.
Examples
ARCCONF GETPERFORM 1 2
arcconf getsmartstats
Description
Displays SMART statistics for the hard drives and Solid State Drives (SSDs) on a controller.
Note: For more information about SMART statistics, see the maxView Storage Manager
User's Guide.
Syntax
ARCCONF GETSMARTSTATS <Controller#> [Tabular]
25Proprietary and Condential to PMC-Sierra, Inc.
Document No.: CDP-00284-01-A Rev. A, Issue:
Adaptec RAID Controller Command Line Utility User's Guide