Adaptec RAID Controller - Arcconf Setstatsdatacollection

Parameters
Controller#
The controller number
Channel#
The channel number for the drive.
Device#
Device number for the device.
LD#
Logical drive number.
State
• HSP—Create a hot spare from a ready drive
• RDY—Remove a hot spare designation
• DDD—Force a drive ofine (to Failed)
MAXCACHE
Optional keyword for maxCache devices only. Include if State is HSP or RDY, and the hot spare is for a
maxCache device.
ADVANCED <option>
Optional keyword/option pair. Set option to Nocheck to force a logical drive to the Optimal state without
performing a consistency check.
Noprompt:
No prompt for conrmation.
Examples
ARCCONF SETSTATE 1 DEVICE 0 0 HSP LOGICALDRIVE 1 2 3
ARCCONF SETSTATE 1 DEVICE 0 0 RDY LOGICALDRIVE 2
ARCCONF SETSTATE 1 LOGICALDRIVE 1 OPTIMAL ADVANCED nocheck
arcconf setstatsdatacollection
Description
Enables or disables statistics collection for a controller. To display the statistics, seearcconf getlogs on
page 24 .
Syntax
ARCCONF SETSTATSDATACOLLECTION <Controller#> Enable|Disable
Parameters
Controller#
The controller number
Enable
Turns statistics collection on.
Disable
Turns statistics collection off.
43Proprietary and Condential to PMC-Sierra, Inc.
Document No.: CDP-00284-01-A Rev. A, Issue:
Adaptec RAID Controller Command Line Utility User's Guide