Adaptec RAID Controller - Page 28

Parameters
Controller#
Controller number.
Channel#
Channel number of the device to be updated.
ID#
Device number of the device to be updated.
ChunkSize#
Chunk size, in bytes, to be used to update the rmware.
Note: For SATA drives, the chunk size must be a multiple of 512.
Filename
Name of the rmware update le.
Mode#
Firmware update mode.
Valid values for physical devices are:
• 3-(SATA) Download with offsets and save image for immediate and future use
• 7-(SAS) Download microcode with offsets, save, and activate
Noprompt
Optional parameter that suppresses alert messages.
28Proprietary and Condential to PMC-Sierra, Inc.
Document No.: CDP-00284-01-A Rev. A, Issue:
Adaptec RAID Controller Command Line Utility User's Guide