DOMINO 24 & 48 USER MANUAL
www.adblighting.com
User Manual - page 59
Issue 1.2
18.4 MIDI
Not implemented at writing of manual
HOLD [function], tap [f/a] (setup), [no], [yes], [yes].
18.5 SETUP PREFERENCES
18.5.1 DEFAULT FADE AND SPEED TIMES
HOLD [function], tap [f/a] (setup), [no] [no], [yes], [yes].
Follow the prompts and set the times with the EDIT wheel.
You can set default times for the following;
• Submaster memories - In time, Out time, Link time
• Cue list - In time, Out time, Link time
• Theatrical memory - In time, Out time, Link time
• Chaser speed, X-fade
Cue list default In and Out times are only used if the step is a snapshot or a chaser. If the
step is a submaster memory it will use its times. When a fade time is set lower than 0
seconds, it is controlled by the rotating speed fader.
To accept the setting, press [ok].
18.6 LANGUAGE
Not implemented at writing of manual
To set the help language shown on the video display:
HOLD [function], tap [f/a] (setup), [no], [no], [yes], [no], [yes].
Press [yes] or [no] to cycle through the available “Help Screen” languages as shown on the
display. Current choices are English, French When your selected language is displayed
press [yes].
18.7 DEFAULT FILE NAME
To set the default name for saving shows;
HOLD [function], tap [f/a] (setup), [no],[no] [yes], [no], [no], [yes].
Move the cursor with [<] or [>] and select characters the EDIT wheel .
To save, press [ok].
18.8 B MASTER INVERTED
The operation of the B master may be inverted so that its output is at minimum when the
fader is at the bottom of its travel.
To set the B Master inversion;
HOLD [function], tap [f/a] (setup).
The display asks “Lock Console?” Press [no].
The display asks “Midi?” Press [no].
The display asks “Set Preferences?”
Press [yes], [no], [no], [no], [yes].
If the Master A is not inverted, the display asks “Master A is not inverted – Invert?”
To invert it press [yes].
If the Master A is inverted, the display asks “Master A is inverted – Set Normal?”
To set normal press [yes].
To Next Page
Loading...
Need help?
General
