DOMINO 24 & 48 USER MANUAL
www.adblighting.com
User Manual - page 28
Issue 1.2
8.2.3 RECORD BANK B SUBMASTERS
During recording, storing, editing or copying, you can directly access any of the submaster
on any Bank B by using the [bank B] and [f/a] buttons. Changing Bank B numbers when
recording, editing or copying does not affect the current contents of a submaster.
If you attempt to record, store or copy over an existing content of a submaster a warning will
appear on the display. To overwrite the content of a submaster either press [yes] or press
the locations [f/a] button a second time. To pick a different submaster press [BANK B]
(optional), [f/a] (new location).
8.2.4 SELECT BANK B SUBMASTERS
When [select], [f/a] is pressed, the copy of a memory or chaser in a submaster can be varied
without affecting the original content of the submaster.
When [select] is de-selected, the changes are retained in the submaster until a new memory
is loaded onto the submaster by a Bank B number change or a copy operation.
To reload the original memory into a submaster press; [copy], [f/a] (to same) [f/a].
8.2.5 EDIT BANK B SUBMASTERS
When [edit], [f/a] is pressed, the copy of a memory or chaser in a submaster and the original
memory are edited.
When [edit], [Bank B], [f/a] is pressed, if the Bank B you select is not currently loaded on a
submaster, the original memory can be edited.
To Next Page
Loading...
Need help?
General
