ADCMT 12704A User Manual

1-3
12704A Resistivity Chamber Operation Manual
1.2 Before Using the Product
1.2 Before Using the Product
(1) Appearance and Accessory Inspection
When receiving the 12704A, perform the following inspection:
 Inspect the 12704A for any damage or defect in appearance.
 Check that the electrode protection sheet is inserted between the electrodes.
If there is any damage in appearance or absence of the accessory, please contact ADC Corpora-
tion or your sales representative.
Table 1-1 Supplied Accessory List
Name Model Quantity Remarks
Electrode protection sheet MPX-F0955A 1 For protection when not in use
Operation Manual E12704A 1
Note: Quote the model name of the accessory when ordering
(2) Optional Accessory
The 12704A optional accessories are listed below. Specify the part number when ordering.
Table 1-2 Optional Accessory List
Name Model Quantity Remarks
Replacement rubber elec-
trode
CC050001 1 For main, guard or opposed elec-
trode
(3) Operating Environment
 Use the 12704A in an area free from dust, corrosive gas and vibrations and away from di-
rect sunlight. The ambient temperature should be 0°C to + 60°C, the relative humidity
should be 80% or less.
Items to be checked

ADCMT 12704A Specifications

General

Brand	ADCMT
Model	12704A
Category	Measuring Instruments
Language	English