ADDER CATx - Clearing IP Access Control

 




78
Clearing IP access control
This option removes all entries from the IP access control feature within the
AdderView CATx IP.
What is IP access control?
The IP access control feature (congurable by a remote admin user) allows
certain network address ranges to be denied access to the AdderView CATx IP.
If set incorrectly, it is possible to exclude all network users and so this option
provides an emergency recovery point.
To clear IP access control
1 From a local or remote (not
accessible from a global keyboard),
log on as the ‘admin’ user.
2 Press (hotkeys can
change).
3 Press to select ‘More menus’.
4 Select ‘Functions’.
5 Select ‘Congure IP port’.
6 Highlight the ‘Clear IP access
control’ option and press .