7
Installation
Mounting
The AdderView CATx units offer two main mounting methods:
• Supplied four self-adhesive rubber feet
• Supplied rack brackets
Connections
Rack brackets
The two supplied brackets (plus four screws), allow
the AdderView CATx unit to be secured within a
standard 1U rack slot.
Note: Both the AdderView CATx and its
power supply generate heat when in
operation and will become warm to the
touch. Do not enclose them or place them
in locations where air cannot circulate
to cool the equipment. Do not operate
the equipment in ambient temperatures
exceeding 40 degrees Centigrade. Do
not place the products in contact with
equipment whose surface temperature
exceeds 40 degrees Centigrade.
HT
To Next Page
Loading...
