Adleepower AP4G3 - Page 35

Acceleration time 2
CD25
Terminal
order
SPEED
CF1 CF2
SPEED - 1 OFF OFF
SPEED - 2 ON OFF
SPEED - 3 OFF ON
SPEED - 4 ON ON
ON
ON ON
ON
Operation Signal
Output frequency
Terminal CF1
Terminal CF2
Speed 1
Speed 2
Speed 3
Speed 4
Speed 1
CD42 or CD43 setting FT1 or FT2=3, then CD25 or CD26 can be
setted.
Setting Range 0.1 ~ 6000.0SEC
Default Value 10.0SEC
33
Third speed setting
CD23
Fourth speed
setting
CD24
Setting Range 0.00 ~ 400.00HZ
Default Value 30.00HZ
Setting Range 0.00 ~ 400.00HZ
Default Value 40.00HZ