Run frequency
setting
CD46
Run terminal output signal if frequency reaches setting value.
HZ
CD46=5
RUN
5th speed setting
CD47
6th speed setting
CD48
7th speed setting
CD49
8th speed setting
CD50
SPEED CF3 CF2 CF1
1th speed setting OFF OFF OFF
2th speed setting OFF OFF ON
3th speed setting OFF ON OFF
4th speed setting OFF ON ON
5th speed setting ON OFF OFF
6th speed setting ON OFF ON
7th speed setting ON ON OFF
8th speed setting ON ON ON
For example, set 8th speed as follows :
1. CD12=1 (Terminal function)
2. CD42 or CD43=6 (Function command)
(FT1 or FT2 CF3)
41
Setting Range 0.5 ~ 1200HZ
Default Value 60.0HZ
To Next Page
Loading...
