ADS-tec IRF2000 Series

To Next Page

To Previous Page

IRF2000 series - standard Doc v2.7 10

Devices with FCC mark on the type plate:

Conformance with FCC rules (USA)

Class A digital device – instructions:

Note: This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the

interference at his own expense.

This conformance is valid for the versions with a FCC marking on the type plate.

ADS-tec IRF2000 Series - Page 10