ADS-tec IRF2000 Series

To Next Page

To Previous Page

IRF2000 series - standard Doc v2.7 9

2.8 Compliance

The manufacturer hereby declares that this device has been marked with the CE mark in accordance

with the basic requirements and other relevant conditions of the following European Directives:

• 2011/65/EU, RoHS Directive

• 2014/30/EU, EMC Directive

• 2014/53/EU, RED Directive

• 2014/35/EU, Low Voltage Directive

A corresponding EU conformity declaration is available for competent authorities at the manufacturer

and can be viewed upon request.

The EU conformity declaration can be requested at

http://www.ads-tec.de/en/support/support-request.html and is available for download at

http://www.ads-

tec.de/en/support/download/industrial-it/ec-declaration-of-conformity.html

Recommendation for use:

For full compliance with the EMC legislation, all components and cables used for

device connection must also be compliant with these requirements. It is therefore

necessary to employ BUS and LAN cables with shielded connectors and these

must be installed as per the instructions contained in the instruction manual.

ADS-tec IRF2000 Series - Compliance