IRF2000 series - standard Doc v2.7 15
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
3.7 Safety instructions
Damage due to electrostatically sensitive components
Damage to the device can be caused by electrostatically sensitive components.
All installation and service work performed on the device must be performed only
under safe, secure and de-energised conditions.
Recommendation for use:
Always adhere to the safety measures applicable when handling components at risk
of being damaged by electrostatic discharges.
The provisions of DIN EN 61340-5-1 / DIN EN 61340-5-2 apply.
To Next Page
Loading...