IRF2000 series - standard Doc v2.7 3
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
5 Assembly ............................................................................................................................... 21
5.1 External dimensions IRF22xx 21
5.2 External dimensions IRF26xx 22
5.3 Mounting options 23
5.3.1 Table mounting 23
5.3.2 Wall mounting 23
5.3.3 Top-hat rail mounting 24
6 System features ..................................................................................................................... 25
6.1 General LED status display 25
6.1.1 Front LEDs 26
6.2 Operational LED status indicators 27
6.2.1 Behaviour of the status indicators during the boot-up process 27
6.2.2 Behaviour of the status indicators when resetting to default settings 27
6.2.3 Behaviour of the status indicators during a firmware update 27
6.3 Interface overview IRF22xx 28
6.4 Interface overview IRF26xx 29
6.4.1 Power supply 24 VDC 31
6.4.2 LAN (RJ45) 32
6.4.3 WAN (RJ45) 32
6.4.4 VPN Control 32
6.4.5 CUT & ALARM 33
6.4.6 Serial interface COM (RS232) 33
6.4.7 USB connections 34
6.4.8 Smartcard reader in accordance with ISO 7816 34
7 Putting into operation ............................................................................................................ 35
7.1 Initial configuration 35
7.2 Manual configuration of the network adapter 36
7.3 Settings for use with Internet Explorer 8 37
7.4 Calling up the device web interface 37
8 Technical data ........................................................................................................................ 39
9 Service & support ................................................................................................................... 41
9.1 ADS-TEC support 41
9.2 Company address 41
To Next Page
Loading...
Need help?
General
