ADTHDIndoorCamera
QuickInstallationGuide
ADTCONTROL
ENROLLMENT
FCCID:P27RC845
14
RC845 Indoor Full HD Camera Installation Guide
9. Click the Continue button to initiate the WPS process. The following
screen appears.
Figure 4-3 Adding Camera Using WPS Screen
10. Press and hold the WPS/Reset
button on the camera for 5 seconds to
establish a wireless connection.
o The Network/WPS LED
flashes amber as the gateway
attempts to connect to the
camera. The wireless
connection is successful when
the Network/WPS LED turns
solid green.
Note: You must complete the WPS
connection within 2 minutes or else the
process will timeout. The time remaining
is displayed in the upper-left portion of
the screen.
Figure 4-4 Pressing WPS Button
To Next Page
Loading...
