NetVanta 5305 Hardware Installation Guide Unit Installation
61200990L1-34N Copyright © 2010 ADTRAN, Inc. 27
Mounting Options
The NetVanta 5305 may be installed in a 19-inch or 23-inch rackmount configuration. The following sections
provide step-by-step instructions for rack mounting.
Figure 8. Rack Mounting the NetVanta 5305
Rack Mounting NetVanta 5305
The NetVanta 5305 can be rack mounted in a 19-inch equipment rack using the mounting kit included with
the shipment. Rackmount adapter kits (P/N 1200775L1) can be purchased separately for installation in a
standard 23-inch rack. Follow these steps to mount the NetVanta 5305 into the equipment rack:
Instructions for Rack Mounting NetVanta 5305
Step Action
1 Attach the rackmount ears to the NetVanta 5305 chassis.
2 To allow proper grounding, scrape the paint from the rack around the mounting holes where the
NetVanta 5305 will be positioned.
3 Position the NetVanta 5305 in a stationary equipment rack.
4 Have an assistant hold the unit in position as you install two mounting bolts through the unit’s
brackets and into the equipment rack using a #2 Phillips-head screwdriver.
5 Proceed to the steps given in the Installing Modules on page 28.
To Next Page
Loading...
Need help?
General
