EasyManuals Logo

ADTRAN Total Access 600R User Manual

ADTRAN Total Access 600R
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
64200600L1#T-31A © 2002, ADTRAN, Inc. Page 33
Total Access 600R User Interface Guide (UIG)
ROUTER>CONFIG>GLOBAL>IP
This parameter is used for general IP configuration.
Mode
This item controls the
G
LOBAL
option for IP routing. The choices are
O
N
and
O
FF
.
The default is
O
N
.
Static Routes
Use this menu to enter static routes to other networks
.
DHCP Server
Use this menu to set up the DHCP server.
DNS
Enter the 600R's domain name and the DNS servers in this menu.
A
CTIVE
Adds this static route entry to the IP routing table when set to
Y
ES
and
removes it (if it was previously added) if set to
N
O
. Default is
Y
ES
.
IP ADDRESS
The IP address of the host or network address of the device being routed
to. Default is
0.0.0.0
.
S
UBNET
M
ASK
Determines the bits in the previous IP address that are used. If this is to be
a host route, it must be set to all ones (255.255.255.255). Default is
0.0.0.0
.
G
ATEWAY
The IP address of the router to receive the forwarded IP packet. Default is
0.0.0.0
.
HOPS
The number of router hops required to get to the network or host.
Maximum distance is 16 hops. Default is 1.
PRIVATE
When set to
N
O
, the 600R will advertise this static route using RIP. Setting
to
Y
ES
means that the route is kept private. Default is
N
O
.
DHCP M
ODE
When set to
O
N
, the 600R acts as a DHCP server and will dynamically
assign IP, network mask, default gateway, and DNS addresses to any
device which transmits a broadcast DHCP request. The addresses as-
signed are based on the 600R’s own IP address and will be within the
same network. Default is
O
FF
.
DHCP R
ENEWAL
T
IME
(
HOURS
)
The number of hours that the DHCP server should allow the device
before it is required to send a new DHCP request. The range is
0-255
.
The default is
15
hours, and
0
represents an infinite lease.
D
OMAIN
N
AME
Text string used to represent the domain name used by the
Total Access 600R.
S
ERVER
1
First server to which domain name requests are sent. Default is
0.0.0.0
.
S
ERVER
2
Server used as a backup, in case the primary address does not respond
to the request. Default is
0.0.0.0
.

Table of Contents

Other manuals for ADTRAN Total Access 600R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ADTRAN Total Access 600R and is the answer not in the manual?

ADTRAN Total Access 600R Specifications

General IconGeneral
BrandADTRAN
ModelTotal Access 600R
CategoryNetwork Router
LanguageEnglish

Related product manuals