ADTRAN Total Access 600R - Modules Menus; Modules>Modules; Figure 12. Modules Menu

64200600L1#T-31A © 2002, ADTRAN, Inc. Page 61
Total Access 600R User Interface Guide (UIG)
Clear
This clears the log when activated.
MODULES MENUS
MODULES>MODULES
The M
ODULES
/M
ODULES
menu provides options that allow you to configure and control the network interface. Figure
12 shows the M
ODULES
/M
ODULES
menu.
Figure 12. Modules Menu
To view the menus for the network interface via the terminal menu, use the arrow keys to scroll to the appropriate
menu; then press Enter.
The table contains T
YPE
,
M
ENU
, A
LARM
, T
EST
, and S
TATUS
indicators/menus. This document describes these menus
for the Net (T1) interface.
MODULES>MODULES>SLT
Identifies the slot number. Slot 0 refers to the Total Access 600R. This is a read-only field.
MODULES>MODULES>TYPE
T
YPE
is displayed as
N
ET
(T1)
indicating the network interface. This is a read-only field.
MODULES>MODULES>MENU
PRT identifies the port number. One is the port number of the network T1 interface.
MODULES>MODULES>MENU>DESC
Displays the name of the T1 interface being configured: NET (network).