EasyManuals Logo

Advanced Access Automation DSL2000 User Manual

Default Icon
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
IMPORTANT SAFETY INFORMATION
WARNING SIGN INSTALLATION:
This vehicular gate operator is supplied with two warning signs to alert people that a potential hazard may exist and that
appropriate action should be taken to reduce the risk of hazard, injury or death.
1. Warning signs must be permanently installed on both sides of the gate and must be fully visible to traffic and pedestrians.
2. Use appropriate hardware such as metal screws (not supplied) to permanently install each warning sign.
INSTALLATION PRECAUTIONS:
DO NOT allow children to play near, on or with the
gate, gate operator, or any of its controls.
!
DO NOT allow pedestrian use of the vehicular gate.
No one should cross the path of a moving gate!
!
DO NOT mount operating devices accessible through
the gate or in between the gate and wall.
!
DO NOT mount the gate operator to a gate heavier
than 1000 pounds. Maximum gate weight = 1000 lbs.
!
DO NOT mount the gate operator to a gate longer than
40 feet. Maximum gate length = 40 feet.
!
40 Feet Maximum Length
1000 lb. Maximum
Gate Weight
DO NOT mount the gate operator on uphill or downhill
applications. Do not allow the gate to free roll.
!

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Advanced Access Automation DSL2000 and is the answer not in the manual?

Advanced Access Automation DSL2000 Specifications

General IconGeneral
BrandAdvanced Access Automation
ModelDSL2000
CategoryGate Opener
LanguageEnglish