ADVANSEA multi s400 User Manual

ADVANSEA multi s400 Specifications

General

Brand	ADVANSEA
Model	multi s400
Category	GPS
Language	English

Summary

Warning

Important

Owner's responsibility for installation, use, and safe boating practices. Plastimo liability disclaimer.

1. Introduction

1.1. General presentation

Overview of the S400 unit, its display features, and functions.

1.2. Components supplied with your MultiS400

Details the standard accessories and connection cables provided with the MultiS400.

1.3. Technical characteristics

Lists key measurement and operational specifications for the S400 series.

2. General operation

2.1. Powering on

Instructions on how to power on the MULTI S400 unit.

2.2. Operation in normal mode

Guide to operating the S400 in its standard navigation mode.

2.3. Alarms

Information on setting and managing alarm thresholds for various measurements.

2.4. Configuration

Details various configuration options and settings for the S400 unit.

2.5. Standby

Explanation of how to enter and exit standby mode to save energy.

2.6. Network operation (Bus AS-1)

Describes how to connect and operate the S400 unit within an AS-1 bus network.

2.7. Messages

Information on event messages displayed by the S400 unit.

3. Installation

3.1. NMEA 0183 interfacing

Explains the NMEA 0183 input and output interfaces for data communication.

3.2. Mounting and connections

Provides instructions for physically mounting the unit and making electrical connections.

4. Troubleshooting