Advantech Adam-4016 User Manual

Chapter 4 Command Set 4-41
Chapter 4
Command Syntax Command Name Description I/O Module
%AANNTTCCFF Configuration Sets the address, input
range, baud rate, data
format, checksum status,
and/or integration time for a
specified analog input
module
4011, 4011D, 4012,
4013, 4015, 4016,
4017, 4018, 4018M,
4019
$AA2 Configuration
Status
Returns the configuration
parameters for the specified
analog input module
4011, 4011D, 4012,
4013, 4015, 4016,
4017, 4018, 4018M,
4019
$AAF Read Firmware
Version
Returns the firmware
version code from the
specified analog input
module
4011, 4011D, 4012,
4013, 4015, 4016,
4017, 4018,
4018M,4019
$AAM Read Module
Name
Returns the module name
from the specified analog
input module
4011, 4011D, 4012,
4013, 4015, 4016,
4017, 4018, 4018M,
4019
#AA Analog Data In Returns the input value from
a specified analog input
moudule in the currently
configured data format
4011, 4011D, 4012,
4013, 4015, 4016,
4017, 4018, 4019
#AAN Read Analog Input
from Channel N
Returns the input value from
channel number n of the
specified analog input
module
4015, 4017, 4018,
4018M, 4019
#AA5VV Enable/Disable
Channels for
Multiplexing
Enables/disables
multiplexing simultaneously
for separate channels of the
specified input module
4015, 4017, 4018,
4018M, 4019
4.4 Analog Input Module Command
4.4.1 Analog Input Command Set
(continued on following page)

Advantech Adam-4016 Specifications

General

Brand	Advantech
Model	Adam-4016
Category	Other
Language	English