Installation Guideline
2-
6
ADAM 4100 Series User’s Manual
connected to make a reference point of each other’s electronic circuit.
Generally speaking, it is necessary to install an individual grounding bar
for each system, such as computer networks, power systems,
telecommunication networks, etc. Those individual grounding bars not
only provide the individual reference point, but also make the earth a
ground.
ADAM-4100 series allow choosing the ground setting. User can use
right side ground scrap to connect. Following picture is illustration.
Configuration with the ADAM Utility Software
The easiest way to configure the ADAM module is by using the ADAM
utility software. It is a user friendly structured menu program that will
guide you through every step of the configuration. (See Appendix A,
Utility Software)
To Next Page
Loading...
Need help?
General