Command Set
4-
46
ADAM 4100 Series User’s Manual
(continue $AACIIIIIIIIIIIIIIOOOOOOOOOOOOOOOO)
Response >(cr) if the command was valid.
?AA(cr) if an invalid command has been issued.
There is no response if the module detects a syntax or
communication error, or even if the specified address does
not exist.
> is a delimiter character indicating that a valid command
was received.
? is a delimiter character indicating that the command was
invalid.
AA (range 00-FF) represents the responding 2-character
hexadecimal address of the digital I/O module.
Example command: $02C00210440000000020000000000010203(cr)
response:
>(cr)
The DI/O channels are set as the following at address 2
II characte
To Next Page
Loading...