Command Set
4-
48
ADAM 4100 Series User’s Manual
4.6.10
$AACICjII
Name Set DI status of specified channel
Description Force the DI channel to different mode.
Syntax $AACICjII(cr)
$ is a delimiter character.
AA (range 00-FF) represents the 2-character hexadecimal
address which is to be accessed.
CI is the set/read the DI status command.
Cj is the channel j
II is the two characters to set the DI mode
(cr) is the terminating character, carriage return (0Dh).
Response >(cr) if the command was valid.
?AA(cr) if an invalid command has been issued.
There is no response if the module detects a syntax or
communication error, or even if the specified address does
not exist.
> is a delimiter character indicating that a valid command
was received.
? is a delimiter character indicating that the command was
invalid.
AA (range 00-FF) represents the responding 2-character
hexadecimal address of the digital I/O module.
To Next Page
Loading...