Command Set
4-
52
ADAM 4100 Series User’s Manual
4.6.13
$AACOCj
Name Read DO status of specified channel
Syntax $AACOCj(cr)
$ is a delimiter character.
AA (range 00-FF) represents the 2-character hexadecimal
address which is to be accessed.
CO is the set/read the DO status command.
Cj is the channel j
(cr) is the terminating character, carriage return (0Dh).
Response !AAOO if the command was valid.
?AA(cr) if an invalid command has been issued.
There is no response if the module detects a syntax or
communication error, or even if the specified address does
not exist.
! is a delimiter character indicating that a valid command was
received.
OO is defined as the same $AACOCjOO.
? is a delimiter character indicating that the command was
invalid.
AA (range 00-FF) represents the responding 2-character
hexadecimal address of the digital I/O module.
To Next Page
Loading...