D-2 ADAM-5510/P31
Performance
D.1 Performance
The ADAM-5510/P31 system hardware is designed to work with
Advantech Paradym-31 software to provide system solutions. The
interactive operation between ADAM-5510/P31 hardware and Advan-
tech Paradym-31 software is sophisticated. Performance evaluation
results are presented below for your reference. These may be useful to
you in planning your use of ADAM-5510/P31 in your applications.
D.1.1 ADAM-5510/P31 standalone
When ADAM-5510/P31 is used alone, its performance is determined
by how fast the ADAM-5510/P31 and the installed I/O modules
interact with Advantech Paradym-31. The following subsections show
representative operational statistics of different I/O modules recorded
under test conditions.
To measure the throughput performance of each ADAM I/O module,
we used the digital outputs of an ADAM-5056 module as an input
trigger and as an input end-point signal to the module to be tested.
The test function block diagrams for each I/O module were as follows.
To Next Page
Loading...
Need help?
General
