Advantech ADAM-5510/P31 User Manual

0-10 ADAM-5510/P31
Quick Start
0.3.4 ADAM-5510/P31 I/O Driver Installation
If you want to use ADAM-5080 module, you have to install ADAM-
5080 I/O Driver at first.
1. Insert ADAM-5510/P31 I/O Driver diskette into your floppy
drive(e.g.A:) in the host PC. Change the host computer default
drive from C: to A:
2. Use your Windows Explorer or the Windows Run command to
execute the Setup Program on the ADAM-5510/P31 I/O Driver
installation diskette. (The path of the Setup program on diskette
should be A:\setup.exe, if your default floppy drive is A: ).
3. The Setup program will specify for you a default installation path,
C:\PARADYM. If you are not satisfied with the default installation
path, just click the Browse button to change to another path (Be
aware that you have to install this ADAM-5510/P31 I/O Driver into
the folder that Advantech Paradym-31 is in). After you have
specified the installation path, just click the Next button.
Figure 0-5: Selecting Installation Path

Advantech ADAM-5510/P31 Specifications

General

Brand	Advantech
Model	ADAM-5510/P31
Category	Controller
Language	English